Configuring The U115; Access The U115 Web Interface - AT&T U115 Install Manual

Configuring the U115

In most cases, no user-level configuration is required as an IP address is retrieved automatically through DHCP and the
device configuration is retrieved from the network. In some cases, it is necessary to perform some initial configuration
through the web Interface – for example if the primary Internet connection needs to be manually configured prior to use.

Access the U115 Web Interface

The U115 web interface can be accessed from a computer attached to a LAN port. The web interface can be used to
access various administration functions and can allow the VPN connection to be controlled.
1. Open your web browser.
2. In the Address or Location box enter http://attvpngateway.att.com and press the Enter key.
3. This will take you to one of several possible initial pages, depending on your configuration and connectivity
options. Common navigation icons appear on the upper left side of each page for access to "Home", "Control
Panel" and "Help"
If the U115 has already retrieved its configuration, it may have been configured for Administrator access. See
Administrator Access on page 19 for more information on gaining administrator access to the web interface.
8