Hub Mode - AT&T U115 Install Manual

Hub Mode

If no VLANs have been configured by your IS Department all eight Local LAN ports on the back of the U115 are
Figure
considered equivalent. The Local LAN Settings page will result in the basic port information display as shown in
19
. In this case, Local LAN equipment can be plugged into any available port on the back of the U115. If you see this
page and you think that VLANs SHOULD have been configured, please contact your IS department.
When complete, return to "Establishing VPN Connectivity on page 20.
Figure 19: Local LAN Settings - Ports
Version D6.0.1
.
© 2018 AT&T Inc. All Rights Reserved
25