Administrator Access - AT&T U115 Install Manual

Administrator Access

One or more users may be designated as administrators by your IS Department. If your U115 was set up for administrator
Figure 13
access, is displayed and you must select your access level. You must be a designated administrator to
configure or control the U115. Select Administrator, enter the password provided by your IS Department, and click OK.
Selecting General User and then clicking OK restricts the current session to be view only. Certain functionality, such as
the ability to terminate the VPN connection, is disabled.
Figure 13
If an Administrator password is not required is not displayed. The U115 must be able to retrieve configuration
from the network in order to implement Administrator access.
Figure 13: Administration Panel
19