Configuring Synapse For Ip Flexible Reach Service; Logging In To Synapse As Administrator - AT&T Synapse SB67070 SIP Configuration Manual

4.2 Configuring Synapse for IP Flexible Reach Service

The Synapse WebUI allows you to configure the SIP Gateway for IP Flexible Reach Service.

4.2.1 Logging In to Synapse as Administrator

To access the Synapse WebUI and log in:
1. Connect your computer to the same IP subnet as the Synapse system, or ensure that
devices on different subnets are able to communicate. For example, you can connect
your computer to the PC port on the back of a Deskset.
2. On the Deskset, press MENU then 4. The Deskset Information screen appears.
3. Find the IP address on the Deskset Information screen.
4. Open a browser. Depending on your browser, some of the pages presented here may
look different and have different controls.
5. Type the Deskset IP Address in the browser address bar and press Enter. The Login page
appears.
6. Enter your login credentials. If logging in for the first time, enter admin in the Login
Name field and 12345 in the Password field, then click Login. You can change your
Admin ID and password once you are logged in.
7. Click topics from the navigation list on the left side of the WebUI to see them. For your
security, the WebUI times out after being idle for 10 minutes, after which you must log
in again.
Page 8 of 16