Configuring A Static Ip Address - AT&T U115 Install Manual

Configuring a Static IP Address

To configure a static IP address, follow these steps after reaching
1. Select the radio button next to "Static" on
2. Enter the Static IP information requested on
information is provided by your ISP.
3. At the end of the setup, you will be asked to reboot to pick up the new configuration. After reboot, skip to the
section titled "Establishing VPN Connectivity" on page 20.
Figure 4
Figure 4
and click OK to proceed to the Static IP set up window.
Figure 6
and press OK to save the new settings. The Static IP
Figure 6: Static IP Settings
12
: