Cleaning And Maintenance; Troubleshooting - BOMANN VSR 352 Instruction Manual

Cleaning and Maintenance

Cleaning
Cleaning Cleaning
WARNING: WARNING: WARNING: WARNING:
• Always disconnect the appliance from the power
supply before cleaning and user maintenance.
• Do not use steam cleaners for cleaning the appli-
ance; moisture could enter electrical components.
Risk of electric shock! Risk of electric shock! Hot steam could damage Risk of electric shock! Risk of electric shock!
the plastic parts.
• The appliance must be dry before restarting oper-
ation.
CAUTION: CAUTION: CAUTION: CAUTION:
• Do not use a wire brush or other sharp, abrasive
items.
• Do not use any acidic or abrasive detergents.
• Do not damage the refrigerant circuit.
Cleaning the appliance including interior Cleaning the appliance including interior Cleaning the appliance including interior Cleaning the appliance including interior
• Clean the appliance interior, the exterior surfaces,
the accessories and the door seal regularly with
warm water and mild detergent.
• Remove for that the appliance content and stor-
age at a cool location.
• Clean the thaw water discharge channel / opening
carefully e.g. with a pipe cleaner.
• After everything was thoroughly dried, you can
restart the operation.
Defrosting Defrosting
Defrosting Defrosting
The appliance has an automatic defrosting system.
During defrosting water drops drains off at the back
of the cooling chamber. The thaw water running
through a channel, is collected in a drip tray located
on the compressor, where it will evaporate. Make
sure the water discharge opening does not get
clogged. A light formation of ice on the interior back
during operation is normal.
and Maintenance
and Maintenance and Maintenance
Changing the bulb Changing the bulb
Changing Changing the bulb the bulb
Lamp specifications: 220 Lamp specifications: 220 Lamp specifications: 220 Lamp specifications: 220- - - - 240 V
• Remove the lamp cover carefully.
• Change the bulb.
• Reattach the lamp cover properly.

Troubleshooting

Troubleshooting Troubleshooting Troubleshooting
Before you contact an authorized specialist Before you contact an authorized specialist Before you contact an authorized specialist Before you contact an authorized specialist
Problem Problem Cause / Action Cause / Action
Problem Problem Cause / Action Cause / Action
Appliance is - Check the power supply / temperature
not working setting / ambient temperature.
properly or - Unblock the ventilation openings, install
at all the appliance freely.
Stored food - Check the temperature setting / ambi-
is too warm ent temperature.
- Open the door only as long as neces-
sary.
Loud noise - Check the appliance position.
during oper- - See the section "Operating noise".
ation
Water on the
Check the temperature setting /
appliance
discharge channel or opening.
bottom
Light does - Check the power supply.
not work - See "Changing the bulb".
NOTE: NOTE:
NOTE: NOTE:
If a problem still persists after following the steps
above, contact your trader or an authorized techni-
cian.
18
240 V ~ / max. 240 V 240 V 10 W 10 W 10 W 10 W
~ / max. ~ / max. ~ / max.
water