Startup / Operation - BOMANN VSR 352 Instruction Manual

Hide thumbs

Table Of Contents

Table of Contents

Available languages

• Avoid the installation:

Avoid the installation:

near heaters, next to a stove, direct sunlight or

any other heat sources;

at locations with high humidity (e.g. outdoors,

bathroom), as metal parts would be suscepti-

ble to corrosion under such circumstances;

near volatile or flammable materials (e.g. gas,

fuel, alcohol, paint, etc.), in rooms which may

have poor air circulation (e.g. garages).

Do not expose the appliance any weather.

Electrical connection

WARNING:

• The installation to the mains supply must conform

to the local standards and regulations.

• Improper connection may cause to an electric

shock!

shock

• Do not modify the appliance plug. If the plug does

not fit properly to the outlet, let install a proper

outlet by an authorized specialist.

• The accessibility of the power plug must be en-

sured to disconnect the appliance from the power

supply in case of emergency.

Make sure that the voltage supply matches the

•

specifications on the rating label before

connecting.

• Connect the mains cable to a properly installed

and earthed wall outlet.

• If the plug after installation is not accessible, a

corresponding disconnect device must be availa-

ble to meet the relevant safety regulations.

Assembling the door handle

Position the handle and fix it with

three screws on the door.

Put on the handle cover.

Prior to first use

CAUTION

CAUTION: : : :

After transport, the appliance should be left standing

upright for about 4 hours before connecting to the

power supply. Nonobservance could lead to malfunc-

tion of the cooling system and causes an appliance

breakdown.

Clean the appliance interior including all accessory

parts. Consider the instructions which we provide in

the chapter "Cleaning and Maintenance".

electric

Starting the appliance

• Connect the appliance to the power supply.

• Operate the temperature control. See also the

section "Settings".

Settings

Setting [ 0 ] means that the appliance is in the off

state. Turn the temperature control clockwise, start-

ing from this setting; the appliance will turn on auto-

matically.

The power levels [ 1–5 ] regulate the different values

of the internal temperature.

Setting 0

Off state

Note that the temperature will change depending on

the ambient temperature, frequency of door opening

and the amount of food in the appliance.

During initial operation, turn the temperature control

to the highest setting first, until the appliance has

reached the desired operating temperature. After-

Attach the cover with a screw.