Unpacking The Appliance; Appliance Equipment; Installation - BOMANN VSR 352 Instruction Manual

Table of Contents

Advertisement

Available languages

Available languages

• Use the provided collection points of electrical equipment for the dis-
posal of the appliance.
Coolant
Coolant
Coolant
Coolant
WARNING
WAR
NING: : : :
WAR
WAR
NING
NING
The coolant circuit of this appliance contains the
refrigerant Isobutane (R600a), a natural gas that is
flammable and of high environmental compatibility.
Make sure no parts of the coolant circuit get dam-
aged during transport and installation of the appli-
ance.
If the coolant circuit is damaged:
If the coolant circuit is da
If the coolant circuit is da
If the coolant circuit is da
• avoid any open flames or ignition source,
• disconnect the plug,
• thoroughly air the room in which the appliance is
installed and
• contact an authorized technician.

Unpacking the Appliance

Unpacking the Appliance
Unpacking the Appliance
Unpacking the Appliance
• Remove the appliance from its packaging.
• Remove all packaging material, such as foils, filler
and cardboard packaging.
• To prevent hazards, check the appliance for any
transport damage.
• In case of damage, do not put the appliance into
operation. Contact your distributor.
NOTE
NOTE
NOTE
NOTE: : : :
Production residue or dust may have collected on the
appliance. We recommend cleaning the appliance
according to chapter "Cleaning and Maintenance".
maged:
maged:
maged:

Appliance Equipment

Appliance Equipment
Appliance Equipment
Appliance Equipment
Appliance overview
Appliance overview
Appliance overview
Appliance overview
Delivery scope
Delivery scope
Delivery scope
Delivery scope
3x Glass shelf, 1x vegetable box, 3x door storage
rack, 1x egg tray, 1x door handle / handle cover incl.
mounting screws
Conditions for the installation location
Condition
Condition
Condition
s for the installation location
s for the installation location
s for the installation location
• Good ventilation is required around the appliance,
in order to dissipate the heat properly and to
guarantee efficient cooling operation at low power
consumption. Sufficient clearance is necessary.
Gap to the back and to the side walls each
-
approx. 10 cm;
Place the appliance so that the appliance door
-
can open without being impeded.
• Only install at a location with an ambient tempera-
ture suitable for the climate class of the appliance.
For information on the climate class, please refer
to the "EU Product Data Sheet" or to the rating la-
bel located in the interior or on the rear side of the
appliance.
• Place the appliance on a steady and safe surface.
If the appliance is not horizontally leveled, adjust
the feet accordingly (one or two adjustable feet
depending on the model).
15
1 1 1 1 Temperature control /
interior light
2 2 2 2 Glass shelves
3 3 3 3 Door storacke racks
4 4 4 4 Vegetable box
5 5 5 5 Feet

Installation

Installation
Installation
Installation

Advertisement

Table of Contents
loading

Table of Contents