Advertisement
16
E
Operation guide.
During building-up of pressure, the position of the parts are following:
1. The none return valve (A) open a little because of the high pressure from pump.2.
The easy start ball valve (C) moves to the lower seat as the easy start spring (D)
impressed more.
3. The s/s spring pressed the s/s piston, and the Activation arm (E) is taken to the front
position, the micro switch (F) at the "switch on" position, the motor (G) is running. 4.
The handle (H) is released, and no water flow from the nozzle
Water flows:
1.From the water inlet to the pump
2. (Decreases during the process). From the pump through the ball valve to the water
inlet
3. From the pump through the none-return valve to the high pressure hose.
16
Advertisement
