Table of Contents
Advertisement
Reading from LCD registers
The EXDUL module provides several writable and readable LCD regi-
sters. UserLCD1 and UserLCD2 correspond to the two lines when using
UserMode LCD display. UserLCD1m and UserLCD2m are two 16-byte
areas, which are stored directly in a non-volatile memory (FLASH) and
are loaded into the registers UserLCD1m or UserLCD2m at module start.
All of the registers are readable as whole 16-byte blocks only.
UserLCD1m & UserLCD2m
EXDUL-581E / EXDUL-581S © 2019 by Messcomp Datentechnik GmbH
LCD Command
UserLCD1 & UserLCD2
wasco
LCD Command Byte
0
2
®
EV03
58
Advertisement
Table of Contents
