Reset ADC-FIFO:
void ResetFIFO()
Description
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Read ADC-FIFO Overflow flag:
ReadOverflowFlagFIFO()
bool
Returned values:
Description:
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Readout ADC-FIFO:
int[]
ReadFIFO()
Returned values:
Description:
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
EXDUL-581E / EXDUL-581S © 2019 by Messcomp Datentechnik GmbH
This command performs a reset of the FIFO.
This shoud be done after an overflow.
Overflowflag false = no Overflow / true = Overflow
Reads the overflow flag of the ADC FIFO. Along
with the readout, the overflow flag is reset
automatically.
Returns an array with the measured values. The
size of the array depends on the number of
measurements
Reads the ADC-FIFO
wasco
®
EV03
45