Fayat Group BOMAG BT 65 Operating Instruction, Maintenance Instruction page 87

Fig. 99
Fig. 100
Fig. 101
Fig. 102
6.
CAUTION!
Danger of eye injuries caused by particles
flying around!
– Wear your personal protective equipment
(safety gloves, protective working clothes,
goggles).
Blow the air filter out with dry compressed air (max. 6 bar
(87 psi)) from inside to outside by moving the gun up and
down inside the element, until it if free of dust.
7. Check gaskets and air filter for damage.
8. Replace the air filter if it is damaged.
9. Insert the air filter and reassemble the air filter cover.
10. Disassemble the left engine guard.
11. Pull the air feed hose (1) and the hose clamp (2) off the air
filter cover (3).
12. Unscrew the fastening screws (1).
13. Disassemble air filter cover and air filter (2).
14. Wipe the inside of the air filter housing only with a clean
cloth.
BT 65
Maintenance – As required
91