Fayat Group BOMAG BT 65 Operating Instruction, Maintenance Instruction page 74

Maintenance – Annually
Final work
Fig. 63
Fig. 64
1 Pipe clamp
2 Fastening screw M6x18
3 Fastening screw M6x14
4 Fastening screw M6x18
Fig. 65
78
1. Clip in the spacer ring (2) on the recoil starter (1).
2.
NOTICE!
The recoil starter may get damaged!
– Do not mix up the fastening screws for the
recoil starter by mistake.
Assemble the recoil starter.
3. Attach the guide handle and tighten the right hand fastening
screws hand-tight.
BT 65