Cleaning The Fuel Screen - Fayat Group BOMAG BT 65 Operating Instruction, Maintenance Instruction

Assembling the fuel filter and filling
it with fuel
Fig. 72
Fig. 73
Final work
Fig. 74

8.7.3 Cleaning the fuel screen

8. Install the new fuel filter (2) by observing the flow direction.
9. Tighten the fastening screw (3), tightening torque: 10 Nm
(7.4 ft·lbf).
10. Connect the lower fuel hoses to the fuel filter with hose clamp
(4).
11. Open the fuel valve (motor stop switch in position "ON"), until
the fuel filter is filled with fuel.
12. Close the fuel valve (engine stop switch in position "OFF").
13. Connect the upper fuel hoses to the fuel filter with hose
clamp (1).
14. Assemble the left hand engine guard, tightening torque:
25 Nm (18 ft·lbf).
15. Dispose of fuel and fuel filter environmentally.
DANGER!
Danger to life caused by explosive gas-air mixes!
– Do not allow gasoline to come into contact with hot
components.
– Smoking and open fire is prohibited.
– Keep away from heat sources, sparks and other
sources of ignition.
– Do not spill any gasoline.
BT 65
Maintenance – Annually
81