Changing The Tamper Foot Plate - Fayat Group BOMAG BT 65 Operating Instruction, Maintenance Instruction

Operation – Changing the tamper foot plate

6.6 Changing the tamper foot plate

Fig. 37
Fig. 38
58
Only use genuine spare parts when changing the
tamper foot plate to a different width.
Protective equipment:
1. Park the machine in secured condition
the machine in secured condition.' on page 55.
2. Allow the machine to cool down.
3. Lay the machine carefully on the rollers.
4. Unscrew the fastening screws.
5. Take off the tamper foot plate and lay the tamper foot on the
floor.
6. Fasten the new tamper foot plate with the fastening screws,
tightening torque: 60 bis 70 Nm (44 bis 52 ft·lbf).
7. Check the engine speed, readjust if necessary
8.7.4 'Checking, adjusting the engine speed' on page 84.
BT 65
n Protective gloves
n Working clothes
Ä Chapter 6.4 'Park
Ä Chapter