Installation - Bristan W BASIN04 C Fitting Instructions & Contents List

4. installation – – – – W BASIN05 C/G (Unslotted)

4. installation

4. installation 4. installation
1. Identify all components are present prior to instillation.
2. Unscrew the clicker mechanism (1) from the flange (2) & the flange (2) from the waste body
(5).
3. Fit the rubber washer (4) onto the waste body (5) & put under the basin. Fit the foam
washer (3) to the flange (2) & screw through the basin into the waste body. It is
recommended that a silicon sealant be applied to all sealing faces of washers (3 & (4).
4. Screw the clicker mechanism 91) back into the flange (DO NOT OVERTIGHTEN).
5. Check all joints & connections for leaks
6. See page 6 for aftercare instructions.
W BASIN05 C W BASIN05 C - - - - Unslotted W BASIN05 C W BASIN05 C Unslotted Unslotted Unslotted
Components: Components:
Components: Components:
1. Clicker Mechanism
2. Flange
3. Foam Washer
4. Rubber Washer
5. Waste Body
6. Backnut
03
W BASIN05 C/G (Unslotted) W BASIN05 C/G (Unslotted) W BASIN05 C/G (Unslotted)
1
2
3
4
5
(DO NOT OVERTIGHTEN).
(DO NOT OVERTIGHTEN). (DO NOT OVERTIGHTEN).
6