Pack Contents List; Pre-Installation - Bristan AR THBSM C Fitting Instructions & Contents List

3. Pack Contents List

3. Pack Contents List
3. Pack Contents List 3. Pack Contents List
2
1. Mixer Valve Body
2. Pillars (including back nuts and washers) X2
3. Sealing (filter) washers (not shown)
4. Pre Installation 4. Pre Installation 4. Pre Installation 4. Pre Installation
4.1 Identify all components and check for completeness, particularly before arranging fitting.
4.2 This mixer should be installed in compliance with water regulations. For further details contact your Local
Water Authority.
4.3 This mixing valve is suitable for use with the following systems:
• Gravity Fed Hot & Cold (Equal Pressure)
• Unvented Systems
• Gas Combination Boiler
• Pumped System (Equal Pressure)
PLEASE NOTE: On gravity systems the minimum distance from the underside of the water tanks / cylinder to the
bath filler must be at least 5 metres.
4.4 Before connecting the mixer, water should be flushed through the system to remove all debris.
04
1
X1
X2