Table of Contents
Advertisement
5.4
Electrical connections
The VB10 cable is equipped with a 25-pin female D-sub connector for connection with
the power supply and input/output signals:
Figure 5.7
25-pin female D-sub connector
Pin
9, 13
25
1 *
2, 21
3, 20
4
5
7
8
11
18
19
10, 12, 22
17
6, 14, 15, 16, 23, 24
* Pins 1 and 25 are connected together internally.
5.4.1 Power supply
The following pins of VB10 connector are used
CHASSIS
:
Figure 5.8
Power supply connections
The power must be 10 V DC to 30 V DC only.
Subject to reasonable modifications due to technical advances.
Pepperl+Fuchs Group • Tel.: Germany (06 21) 7 76-0 • USA (330) 4 25 35 55 • Singapore 7 79 90 91 • Internet http://www.pepperl-fuchs.com
25-pin D-Sub-Buchse Pinout
Name
10 ... 30 V DC
GND
CHASSIS
TX232
RX232
RTX485-
RTX485+
SGND (GND)
OUT1+
OUT2+
EXT. TRIG.+
EXT. TRIG.-
GND
IN 1-
NC
VB10
13/9
25
GND
1
Barcode Scanner VB10
Function
Power supply input voltage +
Power supply input voltage -
Chassis ground
TX RS232 aux. interface
RX RS232 aux. interface
RTX- RS485 main interface
RTX+ RS485 main interface
Signal ground
Output 1 +
Output 2 +
External trigger +
External trigger -
Input/Output reference
Input 1 -
Not connected
USER INTERFACE
10 V DC ... 30 V DC
GND
Copyright Pepperl+Fuchs, Printed in Germany
Installation
13
Advertisement
Table of Contents
