Table of Contents
Advertisement
Wire the Power-on LED
3. Locate the violet/white twisted pair from the 12V power supply board.
4. Solder the wires to the LED leads.
• Connect the violet wire to the anode. The anode is the longer of the two leads.
• Connect the white wire to the cathode.
————————————————————————————
Wire the Power Switch
The power switch has four terminals (two pairs.) One pair will be used to control the power
on/off and the other pair will be used to provide a fast mute for power off.
5. Connect the #20 black twisted pair from the white/black power cable to the two terminals on
the power-on switch that are closest to the bottom of the panel.
6. Connect the #22 black twisted pair from the "external mute" on the Active Output to the two
terminals on the power-on switch that are closest to the top of the panel.
————————————————————————————
48
Advertisement
Table of Contents
