Table of Contents
Advertisement
♪
Mount the 5V Regulator module for the three-input I2S Adapter
Skip this step if you do not have a three input I2S Adapter.
12. Place the 5V Regulator module for the I2S Adapter in its location on top of the standoffs on
the 10V Regulator. Orient the board such that the AC Input is closest to the edge of the panel.
Secure the board with four 6-32 x ¼" screws.
13. Dress the grey twisted pair from transformer pins B3 and B8 toward the 5V Regulator
module. Connect these wires to the 5V Regulator module.
14. Dress the red/black twisted pair toward the front of the panel.
————————————————————————————
26
Advertisement
Table of Contents
