Raleigh Audio Premium Extreme RAKK dac Assembly Manual page 32

25. Locate the 11" red/black twisted pair that is connected to the 12V DC Output.
• It will be connected to the 12V pads on the Active Output output board.
• Connect the red wire to the "+" pad.
• Connect the black wire to the "-" pad.
26. Secure the Power Supply board with five 6-32 x ¼" screws.
————————————————————————————
♪
Mount the RAKK dac
26. Mount the RAKK dac in its location next to the Active Output board.
• Orient the board such that the Output pads are closest to the Active Output board.
• Do not secure the board yet.
27. Locate the orange/black twisted pair, blue/black twisted pair and black wire that are
connected to the "From RAKK dac" pads on the Active Output.
• These will be connected to the "Output" pads on the RAKK dac.
• Connect the orange wire to the "R+" pad and connect the associated black wire to the "R-
" pad.
• Connect the blue wire to the "L+" pad and connect the associated black wire to the "L-"
pad.
• Connect the black wire to the "REF" pad.
28. Locate the 14" red/black twisted pair that is connected to the 5V Regulator.
• It will be connected to the 5V pads on the RAKK dac.
• Connect the red wire to the "+" pad.
• Connect the black wire to the "-" pad.
29. Locate the 20" red/black twisted pair that is connected to the 10V Regulator DC Output.
• It will be connected to the 10V pads on the RAKK dac.
• Connect the red wire to the "+" pad.
• Connect the black wire to the "-" pad.
————————————————————————————
31