Table of Contents
Advertisement
German Light Products® Avoiding damage to the fixture
www.neutrik.com) and ensure that an IP65 rating is maintained for the complete
assembly. Use only the following cable connectors:
- IP65-rated 5-pin XLR connectors for data IN and OUT (THRU)
- Neutrik powerCON TRUE1 NAC3FX-W for Power IN
- Neutrik powerCON TRUE1 NAC3MX-W for Power OUT (THRU).
● Apply a dielectric grease (available from electrical suppliers) to connector terminals and
caps to prevent corrosion and/or electrical short circuits.
● Make sure that cables open into dry areas or sealed junction boxes. Moisture can be
drawn along cables by capillary action or pressure variations resulting from thermal
expansion.
● See drawing on right.
Arrange cables so that they
arrive at connectors from
below. Make sure that it is
impossible for water to flow
down cables and
accumulate at connectors.
If necessary, provide extra
cable slack and create 'drip loops' before connectors.
● Create loose cable bends only. Do not subject connections to bending forces or allow
connections to bear the weight of long lengths of cable.
Avoiding damage from dust and airborne particles
● Carry out regular visual inspections of the fixture to make sure that there is no
accumulation of dirt, especially on the front of the fixture.
● If cleaning is necessary, follow the instructions in 'Service' on page 33.
Transportation and storage
● If fixtures have been fastened together with locking pins, remove the pins and separate
the fixtures before transport. Do not transport fixtures that are fastened together, or
shocks during transport will expose fixtures to leverage forces and may cause damage
that is not covered by the product warranty.
● Transport the fixture in its original packaging to protect it from damage caused by
shocks during transportation.
● Store the fixture in a dry location when not in use.
GLP Service and Support
Contact information for the nearest GLP Service and Support is available online at
www.glp.de/en/service, by email at info@glp.de, or by telephone at the following
numbers:
● GLP Germany: +49 (7248) 927 19-55
● GLP N. America: +1 818 767-8899
● GLP UK: +44 1392 690140
Fusion MBL20 User Manual Rev. A
11
Advertisement
Table of Contents
