Table of Contents
Advertisement
Technical Data
Vibration Information
Vibration total values (triax vector sum) determined according to EN 62841
Drilling into metal
The declared vibration total value may be used for comparing one tool with another, and
may also be used in a preliminary assessment of exposure.
WARNING: The vibration emission value during actual use of the power tool can
differ from the declared value depending on the ways in which the tool is used,
dependant on the following examples and other variations on how the tool is used:
How the tool is used and the materials being inflating.
The tool being in good condition and well maintained.
The use the correct accessory for the tool and ensuring it is sharp and in good condition.
The tightness of the grip on the handles and if any anti vibration accessories are used.
The tool being used as intended by its design and through these instructions.
This tool may cause hand-arm vibration syndrome if its use is not adequately
managed.
WARNING: To be accurate, an estimation of exposure level in the actual conditions
of use should also take account of all parts of the operating cycle such as the
times when the tool is switched off and when it is running idle but not actually doing the
job. This may significantly reduce the exposure level over the total working period.
Helping to minimize your vibration exposure risk.
Maintain this tool in accordance with these instructions and keep well lubricated (where
appropriate).
If the tool is to be used regularly then invest in anti vibration accessories.
Avoid using tools in temperatures of 45
Plan your work schedule to spread any high vibration tool use across a number of days.
Environmental Protection
Waste electrical products should not be disposed of with household waste. Please
recycle where facilities exist. Check with your Local Authority or retailer for
recycling advice.
DISPOSAL OF AN EXHAUSTED BATTERY PACK
To preserve natural resources, please recycle or dispose of the battery pack
properly. This battery pack contains Lithium batteries. Consult your local waste
authority for information regarding available recycling and/or disposal options.
Discharge your battery pack by operating your drill, then remove the battery pack from
the drill housing and cover the battery pack connections with heavy-duty adhesive tape
to prevent short circuit and energy discharge. Do not attempt to open or remove any of
the components.
14
Vibration emission value a
Uncertainty K = 1.5m/s²
C or more.
0
Customer Helpline
0345 640 0800
= 6.125m/s²
h, D
Advertisement
Table of Contents
