Alternate Lens Changing Procedure - Chauvet Ovation P-56VW User Manual

Alternate Lens Changing Procedure

The Ovation P-56VW has the ability to have different types of lenses installed. The interchangeable lenses
allow the product to have alternate beam angles.
To remove the lens
1. Pull knob up.
2. Grab the tab on the lens, and pull it out of the fixture.
DO NOT connect a DMX controller to products operating in Master/Slave mode. The
DMX controller signals may interfere with the signals from the master.
To install a lens
1. Pull knob up.
2. Insert the bottom of the lens at approximately the 5 o'clock position with the lens tab located at the
11 o'clock position.
3. Push the top of the lens in and release the knob.
The lens type is molded into the tab.
Pull knob up to release
and change the lens
Page 8 of 23 Ovation P-56VW User Manual Rev. 4
S
ETUP