Alternate Lens Changing Procedure - Chauvet Ovation P-56WW User Manual

Alternate Lens Changing Procedure

The Ovation P-56WW has the ability to have different types of lenses installed. The interchangeable
lenses allow the product to have alternate beam angles.
To remove a lens:
1. Pull knob up.
2. Grab the Tab on the lens and pull it out of the fixture.
Diffusion filter media (gel) attached to the fixture behind the lens may stick to the
lens being removed. Use caution when removing to prevent damage to the diffusion
gel.
To install a lens:
1. Pull knob up.
2. Insert the bottom of the lens at approx the 5 o'clock position with the lens tab located at the 11
o'clock position.
3. Push the top of the lens in and release the knob..
The lens type is molded into the tab.
Mounting Diagram
Pull knob up to release
and change the lens
Page 8 of 18 Ovation P-56WW User Manual Rev. 4
S
ETUP