Cleaning The Door Seal; Cleaning The Ventilation Gaps - Miele K 34272 iD Operating And Installation Instructions

 Clean the condensate channel and
drain hole frequently so that con-
densate can drain away unhindered.
Use a straw or similar to clear the
drain hole if necessary.
To do this, remove the PerfectFresh
zone compartments.
Be careful not to wash out the spe-
cial lubricant in the telescopic run-
ners during cleaning.
 The PerfectFresh zone compartments
are on telescopic runners. Clean the
telescopic runners with a damp cloth.
 Leave the door open to air the appli-
ance for a short while and to prevent
odours building up.

Cleaning the door seal


Risk of damage as a result of in-
correct cleaning.
If you treat the door seal with oils or
grease, it can become porous.
Do not use any oils or grease on the
door seal.
 The door seal should be cleaned reg-
ularly with clean water and then
wiped dry with a cloth.
Cleaning and care

Cleaning the ventilation gaps

A build-up of dust will increase the en-
ergy consumption of the appliance.
 The ventilation gaps should be
cleaned on a regular basis with a
brush or vacuum cleaner (e.g. use the
dusting brush for Miele vacuum
cleaners)
After cleaning
 Replace all shelves and accessories
in the appliance.
 Reconnect to the mains and switch
the appliance back on.
 Switch on the Super cool function for
a while so that the appliance can cool
down quickly.
 Place food back in the appliance and
close the door.
37