Page 1
QUARTZ HEATER CREOLA Q3 OPERATING INSTRUCTIONS Read the instructions carefully before installing and operating the appliance or performing maintenance operations. Observe all the safety instructions; failure to observe the instructions may cause accidents and/or damages. Store these instructions for future reference.
Page 2
GENERAL SAFETY INFORMATION Use this heater only as outlined in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock or injury to people. Ensure that the mains power complies with the voltage specified on the fan heater data plate (220-240V~50Hz).
Page 3
automatically, as there may be a risk of fire if the fan heater is covered or incorrectly positioned. Do not restrict the air inlet and outlet grilles. The appliance heats up slightly when in use. In order to avoid burns, do not let bare skin touch hot surfaces.
Page 4
Do not use abrasive detergents for cleaning this appliance. Clean the appliance with the aid of a damp (not wet) cloth rinsed in hot soapy water. Always remove the plug from the mains socket before cleaning. To disconnect the fan heater, push the switch to OFF and remove the plug from the socket.
Page 5
Upon initial start-up, the fan heater may emit a slight, harmless smell. This smell is a normal effect of the initial heating up of the internal heating elements, and should not recur later on. WARNING: DO NOT DEPEND ON THE ON/OFF BUTTON SWITCH AS THE SOLE MEANS OF DISCONNECTING POWER.
Page 6
HOW TO USE THE FAN HEATER Put the fan heater vertically on a flat and stable surface. Connect the power cord to a suitable electric socket (230V~/50Hz). The product has 3 quartz elements. The device has two switches that allow different settings. The heating element quartz turn red. ...
Need help?
Do you have a question about the CREOLA Q3 and is the answer not in the manual?
Questions and answers