Pioneer PDP-6010FD Service Manual page 116

1
A
2 Access to PCB Assys
SIDE IO Assy
1
Remove the four screws.
2
Remove the two screws.
3
Remove the four screws.
4
Remove the side input panel (8U).
60F X DRIVE Assy
1
Remove the two screws.
B
2
Remove the side input shield with PCB.
3
Diagnose the 60F X DRIVE Assy.
60F Y DRIVE Assy
1
Remove the two screws.
2
Remove the function button shield with PCB.
3
Diagnose the 60F Y DRIVE Assy.
C
Note:
When removing the POWER SUPPLY
Unit, be sure to remove not only the
POWER SUPPLY Unit but entire PCB
base.
MAIN Assy
D
1
Disconnect cables, connectors, as required.
2
Remove the two screws.
3
Remove the two screws.
4
Remove the POD cover.
5
Remove the POD stay A with PCB.
How to remove the bridge connector
connecting between the MAIN and
TANSHI Assys
(1) Grip the two short edges of the connector with
longnose pliers.
E
(2) Insert a finger between the longnose pliers and the
board to protect the board and the mounted parts on
the board from accidental damage by the pliers then,
using your finger as a fulcrum and the pliers as a lever,
pry the connector upward to remove it.
F
TANSHI Assy
116
1
2
• For 60F X DRIVE Assy
• For 60F Y DRIVE Assy
Function button shield SIDE KEY Assy
PCB base
MAIN Assy
PDP-6010FD
2
3
Side input shield
2
1 1
2
1
1
FHD FAN
CONNECT Assy
POWER SUPPLY Unit
60F Y DRIVE Assy
POD stay A
2
3
TANSHI Assy
3
4
• For SIDE IO Assy
SIDE IO Assy
Side input panel (8U)
1 1
1
2 2
3
×4
4
60F X DRIVE Assy
POD Assy
2
5
3
4
POD cover
MAIN Assy
4
1