Changing A Lamp - Miele DA 3466 Operating And Installation Instructions

Cleaning and care

Changing a lamp

The lamps should be replaced with the
following:
Manufacturer ............................... EGLO
Lamp type .................................... GU10
Specification................................ 12981
Wattage ........................................... 3 W
These lamps are available from Miele or
from specialist retailers.
 Pull out the deflector plate, and
remove the grease filter as described
earlier.
 Switch off the fan and the lighting.

Note that lamps become hot
when in use.
Allow the lamps to cool down for a
few minutes before changing them.
 Remove the charcoal filter if the
rangehood is being used in
recirculation mode.
 Disconnect the rangehood from the
mains electrical supply before
replacing the lamps (see "Warning
and Safety instructions").
24
 Push down the lighting unit slightly
via the opening in the safety panel.
 Turn the lamp anti-clockwise and pull
it out.
 Screw the new lamp into the socket
and push it upwards. Please follow
the manufacturer's safety
instructions.
 Replace the grease filter and, if being
used in recirculation mode, the
charcoal filter.