Changing A Lamp - Miele DA 2360 Operating And Installation Instructions

Changing a lamp

Only use the specified lamps.
Other lamps, e.g. halogen lamps,
may become damaged due to the
high generation of heat.
The lamps should be replaced with a
lamp of the same type:
Manufacturer ............................... EGLO
Lamp type .................................... GU10
Specification................. 11427 or 12981
Wattage ........................................... 3 W
ILCOS D Code...... DR-3-H-GU10-50/56
Alternatively the following lamps can be
used:
Manufacturer ............................... EGLO
Lamp type .................................... GU10
Specification................................ 11511
Wattage ........................................... 5 W
ILCOS D Code...... DR-5-H-GU10-50/54
These lamps have a different luminosity.
Only use lamps of the same type in the
cooker hood.
These lamps are available from Miele or
from specialist retailers.
Cleaning and care
 Switch off the fan and the lighting.

The lamps can get very hot when
in use.
Allow the lamps to cool down for a
few minutes before changing them.
 Disconnect the cooker hood from the
mains electrical supply before
replacing the lamps (see "Warning
and Safety instructions").
 Insert the lever supplied into the gap
between the lamp and the lamp
holder.
The lamp will then drop downwards.
 Grip the lamp, turn it anti-clockwise
and take it out.
 Screw the new lamp into the socket
and push it upwards. Please follow
the manufacturer's instructions.
23