Table of Contents
Advertisement
3
Configuring this machine
The following settings are required.
-
Select [NTLM v1/v2] in [Utility] - [Administrator Settings] - [Network Settings] - [SMB Settings] - [Client
Settings], then tap [OK].
-
Select [Utility] - [Administrator Settings] - [System Settings] - [Date/Time Settings] to specify the same
date/time and time zone between this machine and your computer, then tap [OK].
Checklist
While making notes in the checklist shown below, check computer information and configure settings for
preparation. The completed checklist is used for Store Address.
Name
Host Address
File Path
User ID
Password
3-22
Entry column
IP address to which the scanned data is sent
Name of the dedicated folder to receive the scanned data
User name required to log in to the computer
Password required to log in to the computer
•
You should not enter this column for security reasons.
Scan-to-Send function
Detail
page 3-23
page 3-23
page 3-23
Contact your sys-
tem administrator.
bizhub 658e/558e/458e/368e/308e
3.2
Advertisement
Table of Contents
