Navigation Keys; Special Keys - Bosch Rexroth IndraControl VCP 20.2 Project Planning Manual

6-4 Bosch Rexroth AG | Electric Drives and Controls
Display and Operating Components
6.2.2

Navigation Keys

6.2.3

Special Keys

The key Cursor Left can be configured to directly call up any screen. In
the editor, the cursor is moved one character to the left (character se-
lection). This function corresponds to the system variable KeyCursLeft.
The key Cursor Right can be configured to directly call up any screen.
In the editor, the cursor is moved one character to the right (character
selection). This function corresponds to the system variable Key-
CursRight.
The key Cursor Down can be configured to directly call up any screen.
In the editor, the cursor is moved downwards to the next variable (vari-
able selection). This function corresponds to the system variable Key-
CursDown.
The key Cursor Up can be configured to directly call up any screen. In
the editor, the cursor is moved upwards to the next variable (variable se-
lection). This function corresponds to the system variable KeyCursUp.
The key Cursor Home can be configured to directly call up any screen.
In the editor, the cursor is positioned at the first input variable. This func-
tion corresponds to the system variable KeyHome.
The key Help always displays the current help text (online help func-
tion). When the status LED for the Help key flashes, this indicates that
system messages are pending.The system message is output in plain
text.
The key Data release changes from the menu into the editor. The status
LED for the Data Release key is lit when the editing mode is active.The
editing mode can be exited by pressing this key.
The key Enter is used to complete data entry. When pressed while the
startup screen is displayed, this key calls up the setup screen.
In the editor, the key Delete deletes the character beneath the cursor.It
also deletes any selected messages from the data memory.
Rexroth IndraControl VCP 20 | R911310381 / 02