DEI 800ESP Owner's Manual page 26

s
Full trigger response 30 or 60 seconds: This determines how
long the full triggered sequence lasts. Some states have laws
regulating how long a security system can sound before it is
considered a nuisance. If your installer is programming the
security system with the DEI Bitwriter or a personal computer
and the TechSoft Programmer, the full triggered response can
be programmed for any duration ranging from 1 to 180 seconds.
s
Nuisance Prevention Circuitry
Nuisance Prevention Circuitry Section of this manual for a
complete explanation of how NPC operates. If NPC is pro-
grammed off, the security system will respond to inputs from
any sensor indefinitely.
NOTE: Many states have laws regulating security systems, so program-
ming NPC off may result in your system violating state laws.
s
Progressive door trigger on or off: When the system is armed
with a door open, the system responds with ten chirps prior
to beginning the full triggered sequence. For an instant trig-
ger, the progressive door trigger can be programmed off.
s
Standard or Ghost Switch
arm mode, the Valet switch works in conjunction with the
optional Ghost Switch to execute disarm commands. To en-
hance security, Ghost Switch Only mode may be selected.
When this setting is selected, the Valet button will no longer
disarm the system. The only way you can disarm your system
(without a transmitter) is using the Ghost Switch.
s
Siren tones and chirp volume: The output of the Revenger
Soft-Chirp ® siren consists of six different tones in sequence.
2001 Directed Electronics, Inc.
©
® on or off: Please refer to the
™ Only disarm mode: In standard dis-
®
23