Energy Efficiency - Electrolux EB7L5DCN User Manual

Problem
There is no good cooking
performance using the Ba‐
kingPlus function.
There is no good cooking
performance using the Ba‐
kingPlus function.
The water in the cavity em‐
bossment does not boil.
The water comes out of
the cavity embossment.
11.2 Service data
If you cannot find a solution to the
problem yourself, contact your dealer or
an Authorised Service Centre.
The necessary data for the service
centre is on the rating plate. The rating
We recommend that you write the data here:
Model (MOD.)
Product number (PNC)
Serial number (S.N.)

12. ENERGY EFFICIENCY

12.1 Product Fiche and information according to EU 65-66/2014
Supplier's name
Model identification
Energy Efficiency Index
Energy efficiency class
Possible cause
You did not activate the
BakingPlus function.
You did not fill the cavity
embossment with water.
The temperature is too low. Set the temperature at
There is too much water in
the cavity embossment.
plate is on the front frame of the oven
cavity. Do not remove the rating plate
from the oven cavity.
.........................................
.........................................
.........................................
Remedy
Refer to "Activating the Ba‐
kingPlus function".
Refer to "Activating the Ba‐
kingPlus function".
least to 110 °C.
Refer to "Hints and tips"
chapter.
Deactivate the oven and
make sure that the appli‐
ance is cold. Wipe the wa‐
ter with a cloth or sponge.
Add the correct amount of
water to the cavity em‐
bossment. Refer to the
specific procedure.
Electrolux
EB7L5DCN
EB7L5DSP
81.2
A+
ENGLISH 29