Directed Electronics AdvantGuard 5 Owner's Manual page 31

reset to default settings
All system settings (except PIN and remote programming) in
the User Programming grid will be reset to their default fac-
tory setting as indicated in bold lettering.
Press the arm/disarm button of the TX; the siren will chirp
twice as confirmation.
panic off/on
Off: The panic feature is not available.
On: The panic feature is available.
auto start setting - off/battery only/temp only/battery and temp
This feature is only available with the IntelliStart option.
Off: The vehicle will not autostart.
Battery: The vehicle will only autostart when the car battery
gets low.
Temperature: The vehicle will only autostart at a preset low
temperature.
Battery and temperature: The vehicle will autostart with a
low car battery or low temperature.
n n o o t t e e : : Temperature and battery calibration and settings can be made
only with the Cliffnet Wizard.
blackjax off/on
Off: The system cannot enter BlackJax mode.
On: The system will enter BlackJax mode when triggered.
28