Smith & Noble Metro Chic Hardware Installation Instructions Manual
Ceiling mount single return rod set
Hide thumbs
Also See for Metro Chic Hardware:
- Installation instructions manual (11 pages) ,
- Installation instructions manual (9 pages) ,
- Installation instructions manual (11 pages)
Related Manuals for Smith & Noble Metro Chic Hardware
Summary of Contents for Smith & Noble Metro Chic Hardware
- Page 1 STEP BY STEP INSTALLATION INSTRUCTIONS Metro Chic Hardware Ceiling Mount Single Return Rod Set...
-
Page 2: Table Of Contents
Everything Table of Contents You Need Getting Started ........3 Step 1 - Ceiling Mount Return Rod Set . -
Page 3: Step 1 - Getting Started
STEP 1 - GETTING STARTED OVERVIEW Getting Started Metro Chic Ceiling Mount Return Rod Before you begin, check the accompanying diagram to make sure you have all the parts you need. You’ll need to make sure the surface you intend to install your hardware is sturdy enough to accommodate the brackets. -
Page 4: Step 2 - Marking The Bracket Placement
STEP 2 - MARKING BRACKET PLACEMENT STEP 3 - ATTACHING THE ROD CONNECTOR Mounting the Brackets Depending on your order, you may have received a rod connector. Place the panel on the rod. Hold it up ROD CONNECTOR to the spot you wish to install it mak- A rod connector is the short piece ing sure there is enough spacing from of metal placed inside each end of... -
Page 5: Step 5 - Attaching Brackets To Rod
STEP 4 - PLACING CARRIERS & END STOPS STEP 5 - ATTACHING BRACKETS TO ROD Adding or Removing Carriers Insert the mounting posts into the CEILING CHANNEL BRACKET to the Rod channel in the back of the track. CARRIERS Do not tighten at this time. Your track rod will come with all master carriers and regular carriers pre-installed. -
Page 6: Step 6 - Attaching Returns
STEP 7 - ATTACHING BRACKETS TO THE CEILING STEP 6 - ATTACHING RETURNS Hold the rod up and attach the brack- Slide Return onto rod and tighten CEILING CEILING et to the ceiling, aligning the holes of set screw. BRACKET BRACKET RETURN the bracket with the marks you made... -
Page 7: Step 8 - Attaching Drapery To Rod
ACCESSORIES STEP 7 - ATTACHING DRAPERY TO ROD Baton/Wand (optional) Insert drapery pin hooks into carriers and master carriers. CLIP Baton/Wand will be pre-attached to the master carrier(s). Split Drapery For Split drapery, start pining from MASTER DRAPERY the center and go towards the ends. CARRIERS CARRIER PINS... -
Page 8: Care & Cleaning
NOTES CARE & CLEANING Minimal care and cleaning is needed to maintain the beauty of your Hardware. To Vacuum: Use brush or dust head attachment. To Dust: Use soft, clean cloth. smithandnoble.com 800.248.8888... -
Page 9: Warranty
Warranty Service The enjoyment of your hardware should be everlasting, which is why our products come with a limited lifetime warranty. The warranty applies to the original owner, requires a proof of purchase (hang on to your receipt!) and covers defects in material or craftsmanship.
Need help?
Do you have a question about the Metro Chic Hardware and is the answer not in the manual?
Questions and answers