Miele H 7660 BP Operating And Installation Instructions page 120

Problem solving guide
Problem

Fault F32 appears in
the display.

appears in
Fault F33
the display.
Fault and a fault code
not listed here appears
in the display.
Function currently not
available. appears in the
display after selecting
the Descale function.
Moisture control faulty -
Automatic programmes will
operate without moisture
appears in the display
after selecting an
Automatic programme.
Programmes using
moisture injection will
not take in water.
A noise can be heard
after a cooking process.
The oven has switched
itself off.
120
Possible cause and remedy
The door lock for pyrolytic cleaning has not locked.
 Switch the oven off and then back on again. Start
the pyrolytic cleaning programme again.
 If the message appears again, contact Miele.
The door lock for pyrolytic cleaning does not open.
 Switch the oven off and then back on again.
 If the door lock still does not unlock itself, contact
Miele.
A fault has occurred that you cannot resolve.
 Call Miele.
The steam injection system is faulty.
 Call Miele.
The steam injection system is faulty.
 Call Miele.
Automatic programmes can be run without using
moisture.
Demo mode is active. You can select menu options in
the display and the sensors, but the steam injection
system pump will not work.
 Deactivate demo mode by selecting
Showroom programme
The pump for the steam injection system is faulty.
 Call Miele.
The cooling fan remains switched on after a cooking
programme (see "Settings – Cooling fan run-on").
The oven will switch itself off automatically to save
energy if no other action is taken within a certain time
frame after switching it on or after the end of a
cooking programme.
 Switch the oven back on.
Settings
| Demo mode | Off
|
.