Remote Update - Miele H 7660 BP Operating And Installation Instructions

Settings

Remote Update

The
Remote Update
only displayed and can only be
selected if the requirements for using
Miele@home have been met (see
"Before using for the first time –
Miele@home" or "Settings –
Miele@home").
The RemoteUpdate function is used for
updating the software in your oven. If an
update is available for your oven, it will
automatically download it. Updates will
not be installed automatically. They must
be initiated manually.
If you do not install an update, you can
continue to use your oven as usual.
However, Miele recommends installing
updates.
Switching on/Switching off
RemoteUpdate is switched on as
standard. Available updates will be
downloaded automatically and will only
be installed if you initiate it.
Switch off RemoteUpdate if you do not
wish any updates to be downloaded.
50
menu option is
Running a RemoteUpdate
Information about the content and
scope of an update is provided in the
Miele@mobile App.
A message will appear in your oven
display if a software update is available.
You can install the update immediately or
postpone this until later. When the oven
is switched on again, you will be
reminded about the update.
Switch RemoteUpdate off if you do not
wish to install updates.
The update can take several minutes.
Please note the following information
about the RemoteUpdate function:
– You will only receive a message when
an update is available.
– Once an update has been installed, it
cannot be undone.
– Do not switch the oven off during the
update. Otherwise, the update will be
aborted and will not be installed.
– Some software updates can only be
carried out by a Miele service
technician.