Software Updating - FIP FLS M9.08 Manual

MAX MODE (icon reports MAX)
pH
Output relaxed
Output energized
FLOW
MIN MODE (icon reports MIN)
Flow
Output relaxed
Output energized
WINDOW MODE (icon reports WDW)
Flow
Output relaxed
Output energized
OUTPUT FOR F3.00.W
In case of combination with F3.00.W, LOW BATTERY status and NO SIGNAL
condition can be remoted by two different digital outputs or by one for both
indications.

SOFTWARE UPDATING

In order to update the Instrument Software with a New Firmware Release
follow the suggested procedures:
TO UPDATE INSTALLED UNITS
- Download the interface software "FLS Calibration System"
and the Updated Software on www.flsnet.it
- Launch the software "FLS Calibration System" on the laptop
- Select OPTION and then UPGRADE FIRMWARE
- Confirm the "Firmware Upgrade" procedure by ENTER
14
Setpoint
Hysteresis
Time
Hysteresis
Setpoint
Time
Setpoint
Hysteresis
Hysteresis
Setpoint
Time
MAX MODE (icon reports MAX)
Flow
Output relaxed
Output energized
PULSE MODE (icon reports PLS)
Pulse duration Pulse duration
Volume Volume
Setpoint
Hysteresis
Time
Pulse duration
Volume
Output relaxed
Output energized