Output Mode - FIP FLS M9.08 Manual

OUTPUT MODE

The M9.08 Dual-Parameter pH/ORP and Flow Monitor & Transmitter features
2 solid state relays and 2 mechanical relays in addition to 2 analog output
4-20mA freely.Only the second mechanical relay can be set as a pH/ORP
alarm (icon is 4ALR) related to the feedback of external device managing.
Icon will turn to 4OTA (Over Time Alarm) in case the pH/ORP setpoint has not
been reached within set maximum timing. Icon will turn to 4OVA (Over Values
Alarm) in case pH/ORP values overstep the set value band. In addition to the
type of failure, a reference number correlated to the involved digital output is
reported by the output number.
PROCEDURE FOR OUTPUTS SETTING
- go to the "Options" menu
- enter into the "Outputs activation" sub menu
- enable output(s)
- go to the "Outputs" menu
- set the operating mode for each enabled output
ENTER TO CONFIGURE
Monitor without digital
output activated
12
1 OFF 1 OFF
pH
ENTER TO CONFIGURE
In case a digital output
is enabled, a icon will
appear
EDIT LEVEL
PUSH BUTTON
to modify an item
to scroll right
to return to Menu without saving
to save new settings
1 PRP 1 PRP
pH
ENTER TO CONFIGURE
In case a digital output
is set, icon reports the
operating mode
1 PRP
pH
ENTER TO CONFIGURE
In case set digital
output is activated, the
icon will turn to black
pH