Output Mode - FIP FLS M9.03 Instruction Manual

OUTPUT MODE

The M9.03 Dual Parameter Flow Monitor and Transmitter features 2 solid
state relays and 2 mechanical relays in addition to 2 analog outputs 4-20mA.
PROCEDURE FOR OUTPUTS SETTING
• go to the "Options" menu
• enter into the "Outputs activation" sub menu
• enable output(s)
• go to the "Outputs" menu
• set the operating mode for each enabled output
Monitor without digital
output activated
12
to return to Menu without saving
In case a digital output
is enabled, a icon will
appear
EDIT LEVEL
PUSH BUTTON
to modify an item
to scroll right
to save new settings
In case a digital output
is set, icon reports the
operating mode
In case set digital
output is activated, the
icon will turn to black
(display turns green in
case output is set to
manage an external
device, red to indicate
a activated output as
alarm)