Table of Zones
A zone is represented by the number of LED flashes used by the
system to identify a particular type of input. Standard input
assignments are listed below, along with spaces to write in any
optional sensors or switches that have been installed. If the Warn
Away
®
response is triggered, the LED will not report it.
ZONE
(Number of
DESCRIPTION
LED Flashes)
1
Instant trigger - hood pinswitch
2
Instant trigger - a heavier impact
detected by the shock sensor
3
Door switch trigger
4
Instant trigger - for optional
sensors
5
Ignition trigger
NOTE: Your system stores the last two triggered zones in memory. If your
system has been triggered but the LED has been reset by turning on the
ignition, your dealer can still recall the last two zones that were trig-
gered. Contact your dealer for details.
1999 Directed Electronics, Inc.
©
DEALER-INSTALLED
OPTIONS
23
Need help?
Do you have a question about the Automate 553 and is the answer not in the manual?