Multi-Level Security Arming - Directed Electronics Automate 553 Owner's Manual

Multi-Level Security Arming

Multi-Level Security Arming allows you to select which of the sys-
tem's inputs or sensors will be active or bypassed when the system
is armed. (See Table of Zones in this guide.) Pressing
in Standard Configuration) again within five seconds of arming the
system will activate the Multi-Level Security feature. Each time
is pressed again, a different security level is selected.
The different security levels are selected as follows:
s
Pressing once: The siren chirps once. The system is
armed.
s
Pressing a second time within five seconds: The siren
chirps twice followed by a long chirp. Zone 2 is now bypassed.
s
Pressing a third time within five seconds: The siren
chirps three times followed by a long chirp. Zone 4 is now
bypassed.
s
Pressing a fourth time within five seconds: The siren
chirps four times followed by a long chirp. Zones 2 and 4 are
now bypassed.
s
Pressing a fifth time within five seconds: The siren
chirps five times followed by a long chirp. All input zones,
except the ignition, are now bypassed.
NOTE: Multi-Level Security Arming only applies to a single arming cycle. Once
the system is disarmed and then re-armed, all zones will be active again.
10
(only
1999 Directed Electronics, Inc.
©