Disarming Without A Transmitter - Directed Electronics Automate 553 Owner's Manual

are unable to visually check the vehicle. This feature allows you to
silence and reset the security system when it is triggered, without
having to disarm the system.

Disarming Without a Transmitter

If your remote transmitter is lost or damaged, you can manually
disarm your vehicle security system. To disarm the system without
a transmitter, you must have the vehicle's ignition key and know
where the Valet ® switch is located. Be sure to check with your
installer at the time of installation for both the location and the
preset response (1-5 presses) of the Valet
To disarm the security system,
turn the ignition key on and
press the Valet
preset number of times within
15 seconds. If the system does
not disarm, you may have
waited too long; turn the igni-
tion
process.
IMPORTANT! The Valet
presses for the disarm function. You must check with the installer to ver-
ify the programming for your individual unit.
LOCATION OF VALET ®
12
®
® switch the
off and repeat
® switch can be programmed to respond to 1-5
SWITCH_____________________________
switch.
DRW-35
the
1999 Directed Electronics, Inc.
©