Shutting Down The Remote Start System; Valet Take-Over - Directed Electronics Automate 553 Owner's Manual

Shutting Down The Remote Start System

Pressing and
shut down the remote start system and the vehicle engine will turn
off. You can also shut down the remote start system by pressing on
the brake pedal. You may want to enter the vehicle and drive it
without shutting off the motor. It is possible to shut down the
remote start and drive the vehicle without shutting down the
motor.
To shut down the remote start:
1. Disarm the security system (if
armed) by pressing
transmitter.
2. Enter the vehicle and turn the
ignition to the ON position.
3. Step on the brake pedal.
The remote start system will be shut down when you step on the
brake pedal. The vehicle motor, however, will continue to run
because the ignition has been turned on. The vehicle will now
operate as usual.

Valet Take-Over

A vehicle equipped with the Valet
running after the key is removed from the ignition. This feature is
useful for occasions when you wish to exit the vehicle for short
periods of time, but would like to leave the motor running and the
climate controls on.
16
again, during remote start operation, will
on the
® Take-Over system can remain
1999 Directed Electronics, Inc.
©