Remote Valet; Nuisance Prevention Circuitry (Npc) - Directed Electronics Automate 425 Owner's Manual

Dei automate 425: owners guide

Hide thumbs Also See for Automate 425:

Table of Contents

To enter or exit Valet Mode with

the Valet switch:

1. Turn the ignition on.

2. Turn the ignition off.

3. Press and release the Valet switch

within 10 seconds.

The status LED will light steadily if you are entering Valet Mode

and will turn off if you are exiting Valet Mode.

Remote Valet

You can also activate Valet Mode with the remote transmitter:

1. Open any vehicle door.

2. Press

3. Press

4. Press

again.

The status LED will light solid if you are entering Valet Mode and

will turn off if you are exiting Valet Mode.

Nuisance Prevention

Your system has Nuisance Prevention

annoying repetitive trigger sequences caused by faulty door pin

switches or environmental conditions such as thunder, jackham-

mers, airport noise, etc.

Here's how it works: If the alarm is triggered by the same sensor or

switch three times within a 60 minute period, your system inter-

prets this pattern of triggers as false alarms. After the third trigger,

Circuitry

Circuitry (NPC

DRW-35

™

) to prevent

1999 Directed Electronics, Inc.

Table of Contents

Do you have a question about the Automate 425 and is the answer not in the manual?