Transport And Storage; Content And Check Of The Scope Of Delivery; Transport - Siemens Flender KMP Series Assembly And Operating Instructions Manual

4.

Transport and storage

Observe the instructions in section 3. "Safety instructions"!
4.1

Content and check of the scope of delivery

The content of the delivery is listed on the packing slip. The completeness of the scope of delivery must
be checked against the packing slip directly on receipt. The packaging must not be opened for the check.
Damages on packaging and/or items missing from the package must be reported to Siemens in writing
within 2 weeks.
NOTICE
Property damage
Damage to the gear unit from corrosion is possible.
The packaging must not be opened in any case. Otherwise, the durability period of the gear unit
preservation will reduce.
Note
If the packaging is opened nonetheless, section 4.4 must be observed.
WARNING
Serious personal injury can be caused by a defective product
If there is any visible damage, the gear unit must not be taken into operation.
4.2

Transport

Note
The product weight is indicated on the rating plate.
DANGER
Danger to life
Danger to life from load falling down due to deficient attachment.
Do not stay underneath suspended loads.
When attaching, lifting, lowering and shifting the load, pay attention to the following:
– Observe the load limits.
– Proper fastening of the attachment equipment.
– Centre of gravity possibly being off centre.
– Even load distribution on load-bearing equipment with multiple load hook-ups.
– Low process speed.
– Oscillating the load and/or attaching the load to objects
or building parts is prohibited.
– Load hooks may not be loaded at their tip.
– Set down products only on even, non-slipping and stable underground.
BA 9142 en 02/2015
14 / 84