Siemens Flender KMP Series Assembly And Operating Instructions Manual page 23

Table 3: Examples of combined storage (maximally one change in storage) and the resulting remaining
durability of the interior preservation of the gear unit
In which climatic zone is the construction site
located?
How was the gear unit packaged for transport?
How was the gear unit transported?
In what packaging was the gear unit stored at the
construction site?
Where/how was the packed unit stored?
Change of storage
Storage place of
New
the
packaging for
repackaged unit
storage
without exposed
packaging outdoors
covered with exposed
loose tarpaulin outdoors
Original storage place of the gear unit
None or simple
transport packaging
without sea transport
no packaging
in closed room
or
under roof
Change of
original Durability period of interior preservation of the gear unit for the new
storage storage method in consideration of the previous storage period in months
method after
1 month 4 1/2
3 months 4
6 months 3
12 months 1
not permissible,
max. durability
18 months
period
15 months
1 month 6 1/2
3 months 5 1/2
6 months 4
12 months 1 1/2
not permissible,
max. durability
18 months
period
15 months
BA 9142 en 02/2015
23 / 84
Setup in climatic zone A and at least 50 km
distance from larger bodies of salt water
in closed room
covered with
loose tarpaulin
1)
under roof
4
3
1
not permissible,
max. durability
period 7 months
not permissible,
max. durability
period 7 months
6
4
1
not permissible,
max. durability
period 7 months
not permissible,
max. durability
period 7 months
Transport in
2)
seaworthy packaging
with or without sea transport
2)
seaworthy packaging
exposed
outdoors or
or
covered with
1)
loose tarpaulin
5 4 1/2
4 1/2 4
4 3 1/2
2 1/2 2
1 1/2 1/2
7 1/2 7 1/2
7 7
6 5 1/2
4 3
2 1