Testing
Test whether the dangerous state ends before the point of operation can be
reached.
9.3
To be performed daily by the operating personnel
WARNING
Severe accidents may result if tests are not performed properly!
Make certain that there are no persons in the danger zone.
Stop the dangerous state and open the protective device.
Check the Safety Switch and actuator for damage or tampering.
Make certain that the machine cannot be started while the protective device is
open.
Close the protective device and start the machine.
Test whether the machine stops upon opening of the protective device.
26
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
S20
Leuze electronic