Mounting
Position washers and screw down Safety Switch with 2–3 Nm.
6.3
Mounting the actuator
NOTICE
The Safety Switch may be damaged if mounted improperly!
Use separate mechanical limit stop for the moving part of the protective
device.
Align actuator so that it does not hit or rub against the edges of the insertion
opening.
Prerequisites for proper function:
• actuator is not deformed or damaged
• actuator is suitable for the Safety Switch
Proper function is ensured only with original accessories (see chapter 13).
18
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
S20
Leuze electronic